S300 VILLAIN TURBINE HOUSING S362 S363 S366 S369 S372

This is the new s300 Villain turbine housing.

It is based on the He351cw housing that flows way more than it should.

This housing fits 68mm exducer turbine wheel s300’s. A very popular turbo.

It is a t3 housing. Hx40 outlet. It is exactly 11/16″ shorter then the 12 and 14cm housings.

It is a complete kit with the stainless hold downs, bolts, spring retainer, rod, clasp, and gaskets.

It will take any .70/12cm and .80/14cm and leave it behind. It has a higher total power potential paired with producing more average hp and torque due to more boost at all times.

The gate setup gets it away from the oil drain area making it easy to work on.

Turbine Housing kit Only.

works with the s300 68 turbine only. i can machine it too larger sizes for a additional cost.

Making 930 fuel only on a 5.9 and 840 fuel only on a 6.7. Josh M of Wide Open Throttle Motorsports and I still hold the record making 1448 whp on his 6.7 on spray on the 351 chassis.

This housing destroys the out dated 12 and 14cm housings. And flows way more then the 10cm. I can swap the flange to a 351cw outlet upon request as well.