Savage Fabrication | S300 Villain Turbine Housing S362 S363 S366 S369 S372
This is the new s300 Villain turbine housing. It is based on the He351cw housing that flows way more than it should.
This housing fits 68mm exducer turbine wheel s300’s. A very popular turbo.
It is a t3 housing. Hx40 outlet. It is exactly 11/16″ shorter then the 12 and 14cm housings.
It is a complete kit with the stainless hold downs, bolts, spring retainer, rod, clasp, and gaskets.
It will take any .70/12cm and .80/14cm and leave it behind. It has a higher total power potential paired with producing more average hp and torque due to more boost at all times.
The gate setup gets it away from the oil drain area making it easy to work on.
Works with the s300 68 turbine only. It can be machined too larger sizes for a additional cost.
Making 930 fuel only on a 5.9 and 840 fuel only on a 6.7. Josh M of Wide Open Throttle Motorsports and Savage Fab still hold the record making 1448 whp on his 6.7 on spray on the 351 chassis.
This housing destroys the out dated 12 and 14cm housings. And flows way more then the 10cm. The flange can be swapped to a 351cw outlet upon request as well.
Turbine Housing Kit Only.
Nick (verified owner) –
Really happy with difference this has made on EGTs and smoke control on my borgy 62/68 compared to the 14cm. 10/10
Mathew Kelly –
Thanks for your feedback Nick, Glad that this gave you the outcome you were after 🙂