Mahle / Clevite Conrod Bearings – CB-1413H set of 6 – Cummins 5.9L 89-02

Build your 1989-2002 Dodge 5.9L Cummins to hold up to the competition with the Clevite CB-1413H H-Series Connecting Rod Bearings.

Clevite H-Series Connecting Rod Bearings were developed primarily for NASCAR type racing but are suitable for all types of competition engines.

H-Series bearings have a medium level of eccentricity, high crush, and rod bearings have a hardened steel back and thin overlay.

These bearings also have enlarged chamfers for greater crankshaft fillet clearance and are made without flash plating for better seating.

Use Clevite H-Series Rod Bearings with crankshafts that have oversize fillets and where engines run in the medium to high RPM range.

If you aren’t sure which type of performance bearing to start with, the H series bearing will be your best choice for replacing your OEM rod bearings.

Bearings with .001 in. extra clearance are available for standard size shafts and with or without dowel holes.

H-Series bearings are recommended for use with crankshafts that have oversize fillets and where engines run in the medium to high rpm range. They should also be used if contact patterns obtained with Clevite P-Series bearings are too narrow. Contact patterns should ideally cover 2/3 to 3/4 of the bearing surface.

Compatible With:

*May not work for all builds due to other engine/vehicle modifications

 

Provides your 1989-2002 Dodge 5.9L Cummins with a rod bearing that can handle increased RPMs, especially those where the high rpm cause the rod bores to narrow.

To compensate for this distortion, these direct replacements have higher eccentricity and a high crush factor.

 

for 89-02 Cummins 6BT 5.9L – set of 6 (top and bottom)

Double Duty Diesel is a dealer of MAHLE and is your online source for diesel stock replacement parts. Call us if you need any stock part for your Cummins Diesel.

 

*** These do not fit the fractured style rods, check our other ads for CB1873 Mahle rod bearings to suit Fractured style connecting rods